Filtration

The most economical of filter chambers, this single-cartridge unit will accommodate 6", 10", 20" or 30" length cartridges. The 10" cartridge may not be stacked inside the 20" or 30" chamber because there is no center rod. Because of the unique cartridge compressor design, this chamber can accept a cartridge length variance of 1/4" without any liquid bypass. Completely constructed of CPVC, polypropylene or PVDF with Viton® elastomers. A base is included for surface mounting of the chamber. This chamber can accept double open end, single open end with internal #020 o-ring, or double open end with #120 o-ring each end.

Cartridge Count: 3C - 1

Penguin Filter Housing: Series 4C

This heavy-duty single cartridge chamber will accommodate 10", 20", or 30" length filter cartridges. Because of the internal rod design, this chamber can accept various filter cartridge length +/- 1/4" without liquid bypass. The 4C chamber can accommodate non-standard cartridge lengths with more than 1/4" length from standard by adjustment of the internal rod. The 1" FPT inlet/outlet connections and 4” chamber diameter allow for increased filtration flow rates, especially for larger O.D. sub-micron cartridges (2.50” - 2.90”).

Cartridge Count: 4C - 1

Penguin Filter Housing: Series 6C

These filter chambers incorporate heavy-reinforced ribbing within the molded parts. The double labyrinth o-ring sealing and the long-sleeved flanges, top and bottom, allow these chambers to operate at higher pressures and/or temperatures while also eliminating the use of external frame rods. The simplicity in design and accessibility allows one to completely disassemble and reassemble these chambers in order to replace any broken or damaged part. These chambers can also be converted in the field to a carbon treatment unit or to accept single open end, double #222 o-ring seal sub-micron cartridges with only a small modification. This simple conversion process eliminates the expense of purchasing a completely new chamber.

• Removes solid dirt particles • Quick change of filter elements • Choice of construction materials • Accepts filter cartridges, submicron pleated cartridges or filter sleeves

Cartridge Count: 6C - 3

Penguin Filter Housing: Series 8C

• Removes solid dirt particles • Quick change of filter elements • Choice of construction materials • Accepts filter cartridges, submicron pleated cartridges or filter sleeves

Cartridge Count: 8C - 5

Pentair Big Blue Filter Housing: With Pressure Relief

Big Blue® Housings are manufactured of reinforced FDA grade polypropylene in both 10" and 20" lengths. The specially-designed High-Flow Polypropylene (HFPP) cap is available with either a 3/4", 1" and 1-1/2" NPT ports. #10 Clear Lexan Housing - with 1" NPT ports, for on-site inspection of flow and performance.
Specifications:
3/4" and 1" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 20 GPM
1-1/2" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 40 GPM
Maximum Pressure: 100 PSI Maximum Temperature: 100°F
3/4" and 1" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 25 GPM
1-1/2" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 50 GPM
Maximum Pressure: 90 PSI Maximum Temperature: 100°F

Breadcrumb

Filtration