Pressure Regulation

Plast-O-Matic GGS Series Gauge Guard only: Automatic
Plast-O-Matic GGS Series Gauge Guard only: Automatic

Advantages of Plast-O-Matic Gauge Guards
• Inexpensive initial investment   • Reduces instrument failures   • Reduces system down time   • Eliminates special alloy instruments   • Maximum chemical / temperature compatibility

* “T” in model number refers to PTFE diaphragm, FKM available, change “T” to “V”, prices are the same.

Plast-O-Matic GGS Series Gauge Guard with 2-1/2 IN Stainless Gauge: Automatic - CPVC \ PTFE
Plast-O-Matic GGS Series Gauge Guard with 2-1/2 IN Stainless Gauge: Automatic - CPVC \ PTFE

Plast-O-Matic Chemical Gauge Guards should be utilized to isolate and protect pressure or vacuum instruments used on ultra-pure or highly corrosive fluid lines. Utilization of Plast-O-Matic gauge guards offers the added advantage of protection against clogging of instruments caused by suspended solids or highly viscous fluids. Gauge Guards are available with or without gauges.

Advantages of Plast-O-Matic Gauge Guards
• Inexpensive initial investment   • Reduces instrument failures   • Reduces system down time   • Eliminates special alloy instruments   • Maximum chemical / temperature compatibility 

GGS-Series Gauge Guard with 2-1/2" Stainless Steel Gauges (1/4" gauge connection, 1/2" FNPT process connection)

Plast-O-Matic RVDM Series: Automatic - CPVC \ EPDM
Plast-O-Matic RVDM Series: Automatic - CPVC \ EPDM

Series RVDM In-Line Pressure Relief Valves feature a primary rolling diaphragm and secondary flat diaphragm which incorporates the Plast-O-Matic patented Fail-Dry® design for added protection. If the rolling diaphragm should fail, liquid will weep through the vent port which is located between the two diaphragms. Leakage indicates maintenance is required and can be conveniently scheduled, eliminating an emergency shutdown.  Series RVDM valves are supplied with adjustment screws so that the user can make his own setting according to pressure requirements. Pressure settings can also be made at the factory to customer’s requirements. RVDM valves can be set from 5 to 100 psi (5 to 120 psi for 1/2" size) by simply turning the adjusting bolt.

Plast-O-Matic RVDM Series: Automatic - CPVC \ FKM
Plast-O-Matic RVDM Series: Automatic - CPVC \ FKM

Series RVDM In-Line Pressure Relief Valves feature a primary rolling diaphragm and secondary flat diaphragm which incorporates the Plast-O-Matic patented Fail-Dry® design for added protection. If the rolling diaphragm should fail, liquid will weep through the vent port which is located between the two diaphragms. Leakage indicates maintenance is required and can be conveniently scheduled, eliminating an emergency shutdown.  Series RVDM valves are supplied with adjustment screws so that the user can make his own setting according to pressure requirements. Pressure settings can also be made at the factory to customer’s requirements. RVDM valves can be set from 5 to 100 psi (5 to 120 psi for 1/2" size) by simply turning the adjusting bolt.

Plast-O-Matic RVDT Series: Automatic - CPVC \ PTFE
 Plast-O-Matic RVDT Series: Automatic - CPVC \ PTFE

Series RVDT In-Line Pressure Relief Valves feature a wetted flat PTFE diaphragm to resist both chemical attack and salt crystallization problems. A large, active diaphragm area provides for smooth, chatter-free operation. Relief setting is infinitely adjustable from 5 PSI to 100 PSI. This design functions as a relief valve, by-pass valve, back-pressure valve and anti-siphon valve. The Relief Function protects systems and equipment from over-pressure and pressure surges. The By-Pass Function prevents pumps from “dead-heading”. The Back- Pressure Function maintains necessary reverse pressure in closed-loop systems. The Anti- Siphon Function prevents unwanted chemical siphoning, if city water pressure drops to zero, and changes in elevation create negative pressure. Series RVDT relief valves are constructed of Type 1, Grade 1 PVC, CPVC, Polypropylene, PTFE or PVDF Kynar® body materials. The wetted diaphragm is PTFE, energized by a non-wetted Viton® diaphragm. Springs (not in wetted area) are zinc-plated steel, fasteners are stainless steel and the adjusting screw is polyethylene.