Butterfly Valves & Actuation

Asahi/America Pool-Pro Type SP Series: Manual with Gear - PVC \ EPDM
Asahi/America Pool-Pro Type SP Series: Manual with Gear - PVC \ EPDM

All Pool-Pro Type SP Butterfly valves sizes 1-1/2”-12” shall be of a PVC Body, PVC Disc and EPDM construction suitable for chlorinated water applications. Stem shall be of 316 stainless steel and non-wetted. Valves shall be a self-gasketing design with a convex sealing arrangement. All Pool-Pro Type SP (1-1/2”-10”) valves shall be rated to 150 psi and size (12”) 100 psi at 70°F as manufactured by Asahi/America. Plasgear™ Gear Operator - constructed of composite plastic with black urethane coating, Plasgear™ will not corrode or rust as a result of exposure to harsh chemicals. The new plastic gear box is ideally suited for use in a broad range of applications, such as severe chemicals and sea water.

Asahi/America Type 57P Series: Manual with Gear - PVC \ EPDM
Asahi/America Type 57P Series: Manual with Gear - PVC \ EPDM

Asahi/America Type 57 Butterfly Valves disc has about the same diameter as the connecting piping, and the flow is straight through, with a low pressure drop. The solid thermoplastic butterfly valves have a lined body design and bubble-tight seal with only the liner and the disc as wetted parts. Asahi/America Type 57 Butterfly Valves are self-gasketing, eliminating the need for additional flange gaskets. Asahi/America Type 57 standard model has a PVC or PP body with a polypro, CPVC or PVDF disc for better chemical and abrasion resistance at temperatures higher than can be achieved with other PVC butterfly valves. All models standard with 316SS shaft.

Asahi/America Type 57P Series: Manual with Gear - PVC \ FKM
Asahi/America Type 57P Series: Manual with Gear - PVC \ FKM

Asahi/America Type 57 Butterfly Valves disc has about the same diameter as the connecting piping, and the flow is straight through, with a low pressure drop. The solid thermoplastic butterfly valves have a lined body design and bubble-tight seal with only the liner and the disc as wetted parts. Asahi/America Type 57 Butterfly Valves are self-gasketing, eliminating the need for additional flange gaskets. Asahi/America Type 57 standard model has a PVC or PP body with a polypro, CPVC or PVDF disc for better chemical and abrasion resistance at temperatures higher than can be achieved with other PVC butterfly valves. All models standard with 316SS shaft.

Georg Fischer Type 567: Manual with Lever - CPVC \ EPDM
Georg Fischer Type 567: Manual with Lever - CPVC \ EPDM

The Type 567 is a wafer style butterfly valve rated for pressures up to 150 psi and temperatures of up to 140° F for PVC and 176° F for CPVC, also available in polypropylene and PVDF. Better chemical compatibility is achieved because the inner body is the same material as the piping. The Type 567/578 Butterfly valves have a unique eccentric design that means the disc is not in contact with the seal in the open position. The result is less wear and operating torques half that of previous models. Georg Fischer double eccentric butterfly valves require approximately 50% less operating torque than boot-style competitive valves. Lever and gear operators are both available. In the lever version, the opening angle is clearly indicated on the index plate.

Georg Fischer Type 567: Manual with Lever - PVC \ EPDM
Georg Fischer Type 567: Manual with Lever - PVC \ EPDM

The Type 567 is a wafer style butterfly valve rated for pressures up to 150 psi and temperatures of up to 140° F for PVC and 176° F for CPVC, also available in polypropylene and PVDF. Better chemical compatibility is achieved because the inner body is the same material as the piping. The Type 567/578 Butterfly valves have a unique eccentric design that means the disc is not in contact with the seal in the open position. The result is less wear and operating torques half that of previous models. Georg Fischer double eccentric butterfly valves require approximately 50% less operating torque than boot-style competitive valves. Lever and gear operators are both available. In the lever version, the opening angle is clearly indicated on the index plate.