Butterfly Valves & Actuation

Asahi/America Pool-Pro Type SP Series: Manual with Lever - PVC \ EPDM
Asahi/America Pool-Pro Type SP Series: Manual with Lever - PVC \ EPDM

All Pool-Pro Type SP Butterfly valves sizes 1-1/2”-12” shall be of a PVC Body, PVC Disc and EPDM construction suitable for chlorinated water applications. Stem shall be of 316 stainless steel and non-wetted. Valves shall be a self-gasketing design with a convex sealing arrangement. All Pool-Pro Type SP (1-1/2”-10”) valves shall be rated to 150 psi and size (12”) 100 psi at 70°F as manufactured by Asahi/America. Plasgear™ Gear Operator - constructed of composite plastic with black urethane coating, Plasgear™ will not corrode or rust as a result of exposure to harsh chemicals. The new plastic gear box is ideally suited for use in a broad range of applications, such as severe chemicals and sea water.

Georg Fischer Type 567: Manual with Lever - CPVC \ EPDM
Georg Fischer Type 567: Manual with Lever - CPVC \ EPDM

The Type 567 is a wafer style butterfly valve rated for pressures up to 150 psi and temperatures of up to 140° F for PVC and 176° F for CPVC, also available in polypropylene and PVDF. Better chemical compatibility is achieved because the inner body is the same material as the piping. The Type 567/578 Butterfly valves have a unique eccentric design that means the disc is not in contact with the seal in the open position. The result is less wear and operating torques half that of previous models. Georg Fischer double eccentric butterfly valves require approximately 50% less operating torque than boot-style competitive valves. Lever and gear operators are both available. In the lever version, the opening angle is clearly indicated on the index plate.

Georg Fischer Type 567: Manual with Lever - PVC \ EPDM
Georg Fischer Type 567: Manual with Lever - PVC \ EPDM

The Type 567 is a wafer style butterfly valve rated for pressures up to 150 psi and temperatures of up to 140° F for PVC and 176° F for CPVC, also available in polypropylene and PVDF. Better chemical compatibility is achieved because the inner body is the same material as the piping. The Type 567/578 Butterfly valves have a unique eccentric design that means the disc is not in contact with the seal in the open position. The result is less wear and operating torques half that of previous models. Georg Fischer double eccentric butterfly valves require approximately 50% less operating torque than boot-style competitive valves. Lever and gear operators are both available. In the lever version, the opening angle is clearly indicated on the index plate.