Check Valves

Asahi/America Swing Check Valves are self-contained, automatic valves which are used to prevent the reversal of flow in a pipeline. When open and under flow pressure, the checking mechanism will move freely in the media, offering very little resistance and minimal pressure drop. Asahi/America Swing Check Valves utilize a swinging disc which requires only minimal back pressure to close the valve. This valve can be modified, with lever and weight or spring, to assist in seating faster, and to eliminate shock.

Features -  • Minimum resistance to flow     • May be installed either vertically or horizontally     • Excellent flow characteristics   • Disc seats tightly with minimum back pressure     • Seat materials - EPDM, FKM or PTFE     • All sizes rated for full vacuum service   • PVC valves up to 3” rated for 150 psi @ 80°F, 4" to 6" sizes rated for 100 psi and 8" size rated for 75 psi.

Swing Check Options
• External lever and weight to assist disc in closing quickly     • External spring to assist disc in closing

Wafer Check Valves
MATCO Norca is a leading supplier of high quality check valves to all phases of industry. Metal hinged dual plate check valves are designed and rated in accordance with industry (ANSI and ASME) standards.
• Minimal pressure loss. 200 psi rated @ 150°F     • Minimal installation space and time     • Cast iron body, bronze plates, NBR seat and stainless steel trim
• Ideal for pools, water parks and water features

Note - install minimum 5 pipe diameters downstream from pump discharge or elbow to avoid turbulence

Design Features
This multi-purpose check valve provides an extremely low profile and very quick response to back flow without slamming. The special design requires no more space then a piece of pipe, and incorporates a flexible elastomer seal for long life, and is suitable for mounting in any position for greater versatility.
Technical Information
2" through 8" sizes are rated for 150 psi @ 73°F, 10" and 12" sizes are rated for 100 psi @ 73°F. As a general guideline, opening and closing pressures will range from .2 to .5 psi for horizontal applications. Opening pressures tend to decrease in large size valves. Valves installed in vertical up-flow applications will require slightly higher pressures.
Features
• PVC or CPVC construction - no metal components     • Quick response shut-off in any position     • Field replaceable Flex-Seal - EPDM or Viton®
• Assembled with silicon-free, water soluble lubricants     • Available with either spigot, flanged, grooved pipe or male threaded ends
• Sizes now available to 24" pipe size - call for information