Pumps
Husky 515 Air-Operated Diaphragm Pumps
½ inch Positive Displacement Double Diaphragm Pump
The Husky 515 has a ½ inch (12.7 mm) connection and is available in polypropylene, acetal and PVDF
The Husky 515 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability
Benefits of the Husky 515 double diaphragm pumps
• Center and end porting options
• No mechanical seals to cause fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks
• Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
• Split manifold option to pump multiple fluids without mixing
Overview
• Maximum fluid flow 15 gpm (57 lpm) • Maximum Fluid Discharge Pressure 100 psi (7 bars, 0.7 MPa)
• Maximum size pumpable solids 3/32 in (2.5 mm) • Fluid displacement per cycle 0.04 g (0,15 liters)
Husky 716 Air-Operated Diaphragm Pumps
¾ inch Positive Displacement Double Diaphragm Pump
The Husky 716 has a ¾ inch (19.05 mm) connection and is available in aluminum and stainless steel
The Husky 716 air-operated diaphragm pump features an external controller for remote control capabilities.
Benefits of the Husky 716 double diaphragm pumps
• Center and end porting options
• No mechanical seals which causes fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks
Overview
• Maximum fluid flow 16 gpm (61 l/min) • Maximum Fluid Discharge Pressure 100 psi (7 bars, 0.7 MPa)
• Maximum size pumpable solids 3/32 in (2.5 mm) • Fluid displacement per cycle 0.04 in (0,64 liter)
Husky 716 Air-Operated Diaphragm Pumps
¾ inch Positive Displacement Double Diaphragm Pump
The Husky 716 has a ¾ inch (19.05 mm) connection and is available in aluminum and stainless steel
The Husky 716 air-operated diaphragm pump features an external controller for remote control capabilities.
Benefits of the Husky 716 double diaphragm pumps
• Center and end porting options
• No mechanical seals which causes fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks
Overview
• Maximum fluid flow 16 gpm (61 l/min) • Maximum Fluid Discharge Pressure 100 psi (7 bars, 0.7 MPa)
• Maximum size pumpable solids 3/32 in (2.5 mm) • Fluid displacement per cycle 0.04 in (0,64 liter)
Finish Thompson DB10 Series- Magnetic drive, seal-less pumps for flows to 96 gpm and heads up to 51 feet.
Finish Thompson DB11 Series magnetic drive, seal-less pumps are the new standard for hydraulic efficiency and corrosive fluid handling. These pumps can be used for highly corrosive or mild chemicals, acids or solvents at flows to 116 GPM at temperatures to 220°F. Finish Thompson DB-Series offer the industry’s best five-year warranty.
Applications
• Chemical Processing • Metal Plating • Water and Wastewater • Electronics • Wet Scrubbers • Pulp and Paper