Valves & Actuation

Design Features
This multi-purpose check valve provides an extremely low profile and very quick response to back flow without slamming. The special design requires no more space then a piece of pipe, and incorporates a flexible elastomer seal for long life, and is suitable for mounting in any position for greater versatility.
Technical Information
2" through 8" sizes are rated for 150 psi @ 73°F, 10" and 12" sizes are rated for 100 psi @ 73°F. As a general guideline, opening and closing pressures will range from .2 to .5 psi for horizontal applications. Opening pressures tend to decrease in large size valves. Valves installed in vertical up-flow applications will require slightly higher pressures.
Features
• PVC or CPVC construction - no metal components     • Quick response shut-off in any position     • Field replaceable Flex-Seal - EPDM or Viton®
• Assembled with silicon-free, water soluble lubricants     • Available with either spigot, flanged, grooved pipe or male threaded ends
• Sizes now available to 24" pipe size - call for information

Spear’s innovative design departs from traditional liner-seat type valves to eliminate seat creep, reduce operating torque and provide positive seal off. Ideally suited for flow control or throttling, this high performance valve is offered with a full variety of options for greater application versatility. Pressure rated to a maximum internal pressure of 150 psi at 73°F - including dead end service. Heavy blow-out proof 316 stainless steel stem is standard on all valves. PTFE-coated Stainless steel or titanium stems are available on request.

Spear’s innovative design departs from traditional liner-seat type valves to eliminate seat creep, reduce operating torque and provide positive seal off. Ideally suited for flow control or throttling, this high performance valve is offered with a full variety of options for greater application versatility. Pressure rated to a maximum internal pressure of 150 psi at 73°F - including dead end service. Heavy blow-out proof 316 stainless steel stem is standard on all valves. PTFE-coated Stainless steel or titanium stems are available on request.

Spear’s innovative design departs from traditional liner-seat type valves to eliminate seat creep, reduce operating torque and provide positive seal off. Ideally suited for flow control or throttling, this high performance valve is offered with a full variety of options for greater application versatility. Pressure rated to a maximum internal pressure of 150 psi at 73°F - including dead end service. Heavy blow-out proof 316 stainless steel stem is standard on all valves. PTFE-coated Stainless steel or titanium stems are available on request.

Spear’s innovative design departs from traditional liner-seat type valves to eliminate seat creep, reduce operating torque and provide positive seal off. Ideally suited for flow control or throttling, this high performance valve is offered with a full variety of options for greater application versatility. Pressure rated to a maximum internal pressure of 150 psi at 73°F - including dead end service. Heavy blow-out proof 316 stainless steel stem is standard on all valves. PTFE-coated Stainless steel or titanium stems are available on request.