Flowline Liquid Level Switches

Capacitance Switch: LP15
Capacitance Switch: LP15

The general purpose guard capacitance point level switch provides high or low liquid level detection of water based conductive liquids with light coating, crystallizing or scaling characteristics. RF guard eliminates the coating signal path between the active and reference electrodes. The submersible PP liquid level sensor can be mounted inside the tank or through non-metallic tank walls as a high level alarm or low level alarm.

Guard circuit optimizes performance in coating type media
Compatible with Switch-Pak fitting for vertical tank installation

Large Sump Float: LV42
Large Sump Float: LV42

The general purpose sump float level switch provides reliable liquid level detection and is designed for the automation of pumps, specifically filling and draining of tanks, wells and reservoirs. The LV42 body is free of any irregularities, making it ideal for use in sewage water applications.

Submersible polypropylene body and PVC cable for corrosive liquids.

Compatible with counter weights and cable hangers for simple installation. 

Ideal for use in sewage water applications. 

 

Optic Level Switch: LO10
Optic Level Switch: LO10

The general purpose optic leak switch provides leak detection in and around secondary containment sumps, tanks and piping systems. 

Sensor may be located up to 1000’ from a Flowline relay controller.

Fail-safe leak sensor inverts “wet” to alert user for maintenance.

Requires only a small amount of liquid to detect the presence of a leak.

 

Small Sump Float: LV41
Small Sump Float: LV41

The general purpose sump float level switch provides reliable liquid level detection and is perfect for simple liquid level control for filling or draining reservoirs and tanks. LV41 float switches are universally used for pump automation due to reliability, inexpensiveness and ease of installation.

Ultrasonic Switch: LU10
Ultrasonic Switch: LU10

CSA approved for use in hazardous locations, the intrinsically safe ultrasonic level switch provides high or low liquid level detection of chemical, solvent or low viscosity petroleum based liquids. The submersible PP or PFA level switch sensor is universally mounted through the tank wall or inside the tank, and connected to a PLC or relay controller.

Compatible with Smart Trak and Switch-Pak installation fittings. Ideal for use as a high or low level switch in classified applications. Well suited for use in highly corrosive liquids.