Tubing

Norprene® Industrial Grade Tubing

Norprene® A-60-G Tubing outperforms neoprene, EPDM and other general-purpose tubings, it will not weaken or crack after years of exposure to heat and ozone, providing for long service life. Performance formulated for on-the-job reliability, Norprene® handles temperatures from -75°F to 275°F, and excellent resistance to inorganic (acids and bases) fluids.

• Superior weathering and temperature resistance
• Abrasion and fatigue resistance
• Low gas permeability compared to rubber tubing
• Ozone and UV light resistant
• Compound hardness rating 61, Shore “A”
• Max. recommended operating temperature: 275°F
• Low temperature flexibility: -75°F
Typical Applications
• Soap and disinfectant dispensing
• Plating and etching chemical
• Glass and window washing equipment
• Wastewater sampling
• Printing ink transfer

Priced by the foot, sold in coil lengths only.

Tygon® 2475 High Purity Tubing
Tygon® 2475 High Purity Tubing is ideal for handling sensitive fluids such as pharmaceutical or biological solutions. There is virtually no absorption of key fluid constituents into the tubing material or fluid adsorption onto the tubing walls. As a result, fluid alteration and loss is limited. There is no plasticizer to leach into or contaminate the fluid, yet the tubing remains flexible. Tygon® 2475 can be sterilized by radiation, ethylene oxide, steam or chemical methods.This tubing only releases carbon dioxide and water when properly incinerated, providing safe disposal.

• Meets USP Class VI, FDA and NSF 51 criteria
• Exceptionally Low Absorption and Adsorption
• Smooth interior surface inhibits particulate entrapment
• Highly resistant to aggressive cleaners and sanitizers
• Plasticizer-free, virtually no extractables
• Compound hardness rating 72, Shore “A”
• Max. recommended operating temperature: 125°F
• Low temperature flexibility: -94°F

Priced by the foot, sold in coil lengths only.

Tygon® S3™ E-3603 Laboratory Tubing
Crystal-clear and flexible, Tygon® E-3603 Laboratory Tubing is phthalate-free and contains a non-DEHP plasticizer handles virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating Long-lasting and crack-resistant, Tygon® Laboratory Tubing is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent build-up so that cleaning is facilitated. Coils are marked at 3-foot intervals for easy measuring. Tygon® S3™ is specially formulated for resistance to flex-fatigue and abrasion. It can be sterilized through conventional autoclave methods and Ethylene Oxide. Remains flexible at temperatures down to -45°F.
Versatility and Reliability
Tygon® R-3603 Laboratory Tubing is the most consistently reliable tubing for the transfer o liquids and gases, Tygon® S3™ E-3603 handles virtually all inorganic chemicals found in today’s laboratories.

• The new bio-based formulation delivers the same excellent performance
• Outstanding chemical resistance
• Lot-to-lot consistency for reproducible results
• Smooth, polished inner wall
• Non-aging and non-oxidizing
• Compound hardness rating 56, Shore “A”
• Max. recommended operating temperature: 165°F
• Low temperature flexibility: -51°F
• Complies with FDA, NSF, 3-A
• USP Class VI approved Tygon® S3™ E-3603 Typical Applications
• General laboratory
• Food & Beverage
• Biopharmaceutical
• Analytical instruments
• Peristaltic and vacuum pumps
• Ideal for condensers, incubators, desiccators, gas lines and drain lines

• Size available in longer standard lengths of 100 and 500 feet - call for part number and availability.
* Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599

Priced by the foot, sold in coil lengths only.