Cartridge Filter Housing
This heavy-duty single cartridge chamber will accommodate 10", 20", or 30" length filter cartridges. Because of the internal rod design, this chamber can accept various filter cartridge length +/- 1/4" without liquid bypass. The 4C chamber can accommodate non-standard cartridge lengths with more than 1/4" length from standard by adjustment of the internal rod. The 1" FPT inlet/outlet connections and 4” chamber diameter allow for increased filtration flow rates, especially for larger O.D. sub-micron cartridges (2.50” - 2.90”).
Cartridge Count: 4C - 1
An economical solution to fluoropolymer, stainless or Teflon® housings. Pure polypropylene construction with no fillers, colorants, plasticizers or lubricants to contaminate sensitive liquids. Ultra-smooth contact surfaces prevent bacterial adhesion and build-up. Standard with Viton® O-ring
Specifications:
3/4" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 10 GPM
3/4" #12 “BB” take a 12" Long - 222 cartridge with flows of 1 to 10 GPM
3/4" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 20 GPM
Maximum Pressure: 100 PSI Maximum Temperature: 100° F
An economical solution to fluoropolymer, stainless or Teflon® housings. Pure polypropylene construction with no fillers, colorants, plasticizers or lubricants to contaminate sensitive liquids. Ultra-smooth contact surfaces prevent bacterial adhesion and build-up. Standard with Viton® O-ring
Specifications:
3/4" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 10 GPM
3/4" #12 “BB” take a 12" Long - 222 cartridge with flows of 1 to 10 GPM
3/4" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 20 GPM
Maximum Pressure: 100 PSI Maximum Temperature: 100° F