Diaphragm

Husky 515 Air-Operated Diaphragm Pumps 
½ inch Positive Displacement Double Diaphragm Pump
The Husky 515 has a ½ inch (12.7 mm) connection and is available in polypropylene, acetal and PVDF
The Husky 515 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.
The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability

Benefits of the Husky 515 double diaphragm pumps
•  Center and end porting options
•  No mechanical seals to cause fluid leaks or failures
•  Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
•  Easy-to-service air valve and ball checks
•  Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
•  Split manifold option to pump multiple fluids without mixing

Overview
•  Maximum fluid flow        15 gpm (57 lpm)            •  Maximum Fluid Discharge Pressure    100 psi (7 bars, 0.7 MPa)
•  Maximum size pumpable solids    3/32 in (2.5 mm)        •  Fluid displacement per cycle        0.04 g (0,15 liters)

Husky 716 Air-Operated Diaphragm Pumps 
¾ inch Positive Displacement Double Diaphragm Pump
The Husky 716 has a ¾ inch (19.05 mm) connection and is available in aluminum and stainless steel
The Husky 716 air-operated diaphragm pump features an external controller for remote control capabilities.

Benefits of the Husky 716 double diaphragm pumps
•  Center and end porting options
•  No mechanical seals which causes fluid leaks or failures
•  Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
•  Easy-to-service air valve and ball checks
 
Overview
•  Maximum fluid flow                      16 gpm (61 l/min)        •  Maximum Fluid Discharge Pressure    100 psi (7 bars, 0.7 MPa)
•  Maximum size pumpable solids    3/32 in (2.5 mm)        •  Fluid displacement per cycle        0.04 in (0,64 liter)

Designed with a chemical-resistant polypropylene fluid section that provides high corrosion resistance, this ground-breaking electric pump is built to efficiently handle fluid transfer applications involving most chemicals and detergents, sump evacuation applications, as well as applications involving high and low pH materials. With up to 8 times more continuous torque at low speeds than conventional motors, this powerful new pump delivers a higher level of reliability to minimise downtime while the plug-and-play design makes it easy to drop into any production line without additional investment or infrastructure rework.

• Revolutionary design
  • Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
  • The patented FluxCore drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
  • Up to an 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
  • Quiet operation reduces plant noise and improves employee safety and health
  • Smart pump control provides more accurate flow set points and built-in I/O
• FluxCore motor
  • Powder-coated aluminium FluxCore drive
  • 120 VAC 1Φ motor with 4.5 m (15 ft) cord and NEMA 5-15 plug
  • Non-hazardous
• Construction materials
  • Polypropylene fluid section with an end flange
  • Internal components include a polypropylene seat, PTFE ball, PTFE/Santoprene 2-piece diaphragm and PTFE manifold O-ring
  • Comes standard with 15' power cord