Strainers & Filtration
Hayward Y-Strainers are supplied with a 1/32" perforated plastic screen. Screens fabricated from type 316 stainless steel are also available in openings from 1/2" down to super fine 325 mesh. All screens have an open area at least twice that of the equivalent pipe size cross-sectional area to minimize pressure drop.
Hayward Y-Strainers are supplied with a 1/32" perforated plastic screen. Screens fabricated from type 316 stainless steel are also available in openings from 1/2" down to super fine 325 mesh. All screens have an open area at least twice that of the equivalent pipe size cross-sectional area to minimize pressure drop.
Penguin in-tank filter chambers allow for depth filtration completely limited to inside the tank. Thus, there is no possibility of solution loss. These filter chambers are completely constructed of CPVC, including the rugged mounting bracket. Five sizes include single cartridge and three cartridge vessels in 10", 20", and 30" cartridge lengths. These chambers incorporate all the unique construction advantages of our style 3C and 6C chambers. The cartridge compressor design in the style 3C chambers and the double labyrinth o-ring sealing, along with the long-sleeved flanges on the top of style 6C, are also incorporated into our series CN chambers.
Cartridge Count: 3CN - 1, 6CN - 3
The most economical of filter chambers, this single-cartridge unit will accommodate 6", 10", 20" or 30" length cartridges. The 10" cartridge may not be stacked inside the 20" or 30" chamber because there is no center rod. Because of the unique cartridge compressor design, this chamber can accept a cartridge length variance of 1/4" without any liquid bypass. Completely constructed of CPVC, polypropylene or PVDF with VitonĀ® elastomers. A base is included for surface mounting of the chamber. This chamber can accept double open end, single open end with internal #020 o-ring, or double open end with #120 o-ring each end.
Cartridge Count: 3C - 1
Big BlueĀ® Housings are manufactured of reinforced FDA grade polypropylene in both 10" and 20" lengths. The specially-designed High-Flow Polypropylene (HFPP) cap is available with either a 3/4", 1" and 1-1/2" NPT ports. #10 Clear Lexan Housing - with 1" NPT ports, for on-site inspection of flow and performance.
Specifications:
3/4" and 1" #10 āBBā take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 20 GPM
1-1/2" #10 āBBā take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 40 GPM
Maximum Pressure: 100 PSI Maximum Temperature: 100Ā°F
3/4" and 1" #20 āBBā take a 20" to 20-1/8" cartridge with flows of 1 to 25 GPM
1-1/2" #20 āBBā take a 20" to 20-1/8" cartridge with flows of 1 to 50 GPM
Maximum Pressure: 90 PSI Maximum Temperature: 100Ā°F