CPVC Schedule 80 Fittings

• CPVC Sch. 80 fittings produced from CPVC Cell Class 23447
• Materials conform to ASTM F441, Type IV, Grade I
• Withstands temperatures to 200°F
• NSF Standard 61 for use with potable water service

( F ) Fabricated fitting

Warning - not for use with compressed air or gases !

Expansion Joint: Socket
Expansion Joint: Socket

Linear expansion and contraction from temperature fluctuations can be a major problem in thermoplastic piping systems. Forces left uncontrolled can literally tear systems apart. Spears Expansion Joint allows a telescoping movement of an inner pipe within a firmly mounted outer tube to eliminate such damage. Available in CPVC 1/2" through 12" and PVC 1/2" through 14" IPS piping systems, in 6" or 12" maximum travel lengths. Custom produced for virtually any pipe diameter. 
 

Expansion Joint: Socket with EPDM Bellows
Expansion Joint: Socket with EPDM Bellows

Elastomer Expansion Joints allow for expansion, contraction, lateral and angular movement in piping systems. Ideal for use on pumps, chillers, cooling towers, etc..., to absorb pipe movement and stress, compensate for minor misalignment and offset, aid in system noise reduction and vibration. Pressure rating 150 psi @ 73°F. Suitable for vacuum service.

• Maximum operating temperatures should not exceed 140°F

Expansion Joint: SS Reinforced Thread with EPDM Bellows
Expansion Joint: SS Reinforced Thread with EPDM Bellows

Elastomer Expansion Joints allow for expansion, contraction, lateral and angular movement in piping systems. Ideal for use on pumps, chillers, cooling towers, etc..., to absorb pipe movement and stress, compensate for minor misalignment and offset, aid in system noise reduction and vibration. Pressure rating 150 psi @ 73°F. Suitable for vacuum service.