Cartridge Filter Housing

Penguin Filter Housing: In-Tank Filter Housing
Penguin Filter Housing: In-Tank Filter Housing

Penguin in-tank filter chambers allow for depth filtration completely limited to inside the tank. Thus, there is no possibility of solution loss. These filter chambers are completely constructed of CPVC, including the rugged mounting bracket. Five sizes include single cartridge and three cartridge vessels in 10", 20", and 30" cartridge lengths. These chambers incorporate all the unique construction advantages of our style 3C and 6C chambers. The cartridge compressor design in the style 3C chambers and the double labyrinth o-ring sealing, along with the long-sleeved flanges on the top of style 6C, are also incorporated into our series CN chambers.

Cartridge Count: 3CN - 1, 6CN - 3 

Penguin Filter Housing: Series 3C
Penguin Filter Housing: Series 3C

The most economical of filter chambers, this single-cartridge unit will accommodate 6", 10", 20" or 30" length cartridges. The 10" cartridge may not be stacked inside the 20" or 30" chamber because there is no center rod. Because of the unique cartridge compressor design, this chamber can accept a cartridge length variance of 1/4" without any liquid bypass. Completely constructed of CPVC, polypropylene or PVDF with Viton® elastomers. A base is included for surface mounting of the chamber. This chamber can accept double open end, single open end with internal #020 o-ring, or double open end with #120 o-ring each end.

Cartridge Count: 3C - 1

Pentair Big Blue Filter Housing: With Pressure Relief
Pentair Big Blue Filter Housing: With Pressure Relief

Big Blue® Housings are manufactured of reinforced FDA grade polypropylene in both 10" and 20" lengths. The specially-designed High-Flow Polypropylene (HFPP) cap is available with either a 3/4", 1" and 1-1/2" NPT ports. #10 Clear Lexan Housing - with 1" NPT ports, for on-site inspection of flow and performance.
Specifications:
3/4" and 1" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 20 GPM
1-1/2" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 40 GPM
Maximum Pressure: 100 PSI Maximum Temperature: 100°F
3/4" and 1" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 25 GPM
1-1/2" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 50 GPM
Maximum Pressure: 90 PSI Maximum Temperature: 100°F

Pentair Cartidge Filter Housing: With Pressure Relief
Pentair Cartidge Filter Housing: With Pressure Relief

Standard 3/4” NPT housings are manufactured of reinforced polypropylene, FDA-grade plastic, and lightweight also makes them preferred in residential and commercial uses. Their polypropylene construction has excellent chemical resistance for use with most acids, alcohol, ammonia, oils, plating solutions, beverages and water. Housings without pressure relief buttons are recommended for industrial/chemical applications. #10 Clear Standard Filter Housings Housing bodies are made of clear Styrene-Acrilonitrile (SAN) which has been stress relieved for added clarity and strength. Clear bodies allow for visual inspection of cartridge performance and life. The SAN/polypropylene construction combination has excellent chemical  compatibility.
Specifications: Two body lengths are available for sizing flow rates of 1 to 20 GPM #10 housings take a 9-3/4” to 9-7/8” cartridge with flows of 1 to 10 GPM #20 housings take a 20” to 20-1/8” cartridge with flows of 1 to 20 GPM
Maximum Pressure: 125 PSI Maximum Temperature: 125°F

Pentair Cartidge Filter Housing: Without Pressure Relief
Pentair Cartidge Filter Housing: Without Pressure Relief

Standard 3/4” NPT housings are manufactured of reinforced polypropylene, FDA-grade plastic, and lightweight also makes them preferred in residential and commercial uses. Their polypropylene construction has excellent chemical resistance for use with most acids, alcohol, ammonia, oils, plating solutions, beverages and water. Housings without pressure relief buttons are recommended for industrial/chemical applications. #10 Clear Standard Filter Housings Housing bodies are made of clear Styrene-Acrilonitrile (SAN) which has been stress relieved for added clarity and strength. Clear bodies allow for visual inspection of cartridge performance and life. The SAN/polypropylene construction combination has excellent chemical  compatibility.
Specifications: Two body lengths are available for sizing flow rates of 1 to 20 GPM #10 housings take a 9-3/4” to 9-7/8” cartridge with flows of 1 to 10 GPM #20 housings take a 20” to 20-1/8” cartridge with flows of 1 to 20 GPM
Maximum Pressure: 125 PSI Maximum Temperature: 125°F