Cartridge Filter Housing

The most economical of filter chambers, this single-cartridge unit will accommodate 6", 10", 20" or 30" length cartridges. The 10" cartridge may not be stacked inside the 20" or 30" chamber because there is no center rod. Because of the unique cartridge compressor design, this chamber can accept a cartridge length variance of 1/4" without any liquid bypass. Completely constructed of CPVC, polypropylene or PVDF with Viton® elastomers. A base is included for surface mounting of the chamber. This chamber can accept double open end, single open end with internal #020 o-ring, or double open end with #120 o-ring each end.

Cartridge Count: 3C - 1

This heavy-duty single cartridge chamber will accommodate 10", 20", or 30" length filter cartridges. Because of the internal rod design, this chamber can accept various filter cartridge length +/- 1/4" without liquid bypass. The 4C chamber can accommodate non-standard cartridge lengths with more than 1/4" length from standard by adjustment of the internal rod. The 1" FPT inlet/outlet connections and 4” chamber diameter allow for increased filtration flow rates, especially for larger O.D. sub-micron cartridges (2.50” - 2.90”).

Cartridge Count: 4C - 1

An economical solution to fluoropolymer, stainless or Teflon® housings. Pure polypropylene construction with no fillers, colorants, plasticizers or lubricants to contaminate sensitive liquids. Ultra-smooth contact surfaces prevent bacterial adhesion and build-up. Standard with Viton® O-ring
Specifications:
3/4" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 10 GPM
3/4" #12 “BB” take a 12" Long - 222 cartridge with flows of 1 to 10 GPM
3/4" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 20 GPM
Maximum Pressure: 100 PSI Maximum Temperature: 100° F

An economical solution to fluoropolymer, stainless or Teflon® housings. Pure polypropylene construction with no fillers, colorants, plasticizers or lubricants to contaminate sensitive liquids. Ultra-smooth contact surfaces prevent bacterial adhesion and build-up. Standard with Viton® O-ring
Specifications:
3/4" #10 “BB” take a 9-3/4" to 9-7/8" cartridge with flows of 1 to 10 GPM
3/4" #12 “BB” take a 12" Long - 222 cartridge with flows of 1 to 10 GPM
3/4" #20 “BB” take a 20" to 20-1/8" cartridge with flows of 1 to 20 GPM
Maximum Pressure: 100 PSI Maximum Temperature: 100° F